Navigation
Navigation



Recording Drums? How many mics do you use?





Current Tape Reviews

Pretty Fool
 
Artist Name:
Rick Harper
  Title:
Pretty Fool
 
Date Posted:
February 2017
 
Genre:
Rock and Pop
Equipment Used:

PC running Pro Tools LE 8, Korg MDE-X, Chandler Limited Abbey Road plug-ins, Bomb Factory compressor, Softube FET compressor. Mics: Audio-Technica AT4040 (vocals, acoustic guitar, overheads), Shure SM57 (snare), Shure SM58 (rack tom, organ amp), unidentified Samson mic (floor tom), unidentified CAD mic (kick). Seagull S6 and S12 acoustic guitars, Fender Strat through Line 6 PODxt, 1976 Musicman Stingray bass with Fender Bassman amp, Gretsch Catalina Club drumkit, Casio Celviano digital piano, Korg CX3 organ through Line 6 Roto-Machine pedal into Peavey bass amp, percussion.

Loading audio player ...
Production Notes & Credits:

"Pretty Fool" is a male vocal rock song. Rick wrote, performed and recorded the track at his home studio.

Reviewed By: Marty Peters
Rating: 3
In his production notes, Rick reminds us that we reviewed one of his submissions some sixteen years ago. Well, good sir, it's awesome that you are still a follower of Recording and Readersí Tracks! This time around Rick has submitted a cool one man band track with a nice Tom Petty and The Heartbreakers sort of vibe. So how did he do under the weight of all those hats?

Unfortunately, a lot of pretty good stuff is getting overshadowed by the sheer amount of compression being applied to the lead and backing vocals in the mix. As we have discussed time and again in this column, compression/limiting mismanagement is very near the top of all of the faux pas that are made by home and project studio recordists.

Whether it is improper attack/release times or excessive threshold settings, something seems to downright confuse a lot of folks out there in Recording Land. In Rick's case the trouble starts with the first S sounds in his vocals. The Fs follow suit, elongating and smearing as they will do under these circumstances, until the entire vocal becomes distracting with the artifact.

On the plus side, Rick acquitted himself nicely in some other areas here. We were particularly impressed by the drums and bass, which both sounded great in our opinion... a difficult task when one is both the engineer and performer!

Suggestions: When diagnosing any type of vocal compressor/limiter issue, we have to start with one very basic question: did the part actually warrant volume reduction/averaging, or was there some other way to tame the beast?

There are times when mic technique and fader manipulation or automation are simply a more effective way to deal with inconsistent volume. The seemingly arcane notion of "riding" the faders was once upon a time the main fix in compressor-poor studios. In today's plug-in landscape, "slap a compressor on it" is the order of the day, whether itís necessary or not.

As far as suggestions go, if Rick's vocal was compressed this heavily during tracking, then not much can be done to reverse the problem short of a new performance. If, however, the problem occurred during mixdown, we would suggest that he remove the compression/limiting plug-in entirely from the channel and explore other options, including fader automation, along with some very minimal processing in order to balance out his vocals.

Summary: Welcome back, Rick!

Contact: Rick Harper, harperbass@yahoo.com, www.rickenharper.com
About: Marty Peters

Click to view details



Kef America



The Magazine | Featured Review | Resources & Info | Readers' Tapes | Editors' Blogs | News | Shop | About Us | Contest | Subscriptions | Contact
Terms and Policy | Advertise | Site Map | Copyright 2014 Music Maker Online LLC | Website by Toolstudios
RSS Newsletter Refer a Friend Q&A Q&A