Navigation
Navigation
Quote of the Day

“If you simply focus on listening, the session will go smoother. The deadly “failure to communicate” occurs when you use the talkback switch as an interrupt switch...During the points of confusion and disagreement that will come up during a session, you must not abuse this power to interrupt.”- Dave Moulton

Bottom of quote of the Day


Most difficult instrument to record?






News

Back
Friday, March 14th 2014, Sydney Australia - RODE Micropho...
New RODE Stereo Bar
3/13/2014
Friday, March 14th 2014, Sydney Australia - RODE Microphones is excited to announce that it has commenced shipping its new Stereo Bar for precision microphone mounting in stereo arrays.
Spacing between the microphones is clearly indicated on both sides at 10cm, 15cm and 20cm, as well as the critical 17cm distance for ORTF stereo technique. In the middle of the Stereo Bar is an angle indicator displaying both 90 degrees for X-Y stereo arrays and 110 degrees for ORTF placement, removing the need for guesswork and allowing the recording engineer to set up precision stereo arrays every time.

Constructed from durable PC-ABS plastic, the bar can easily support the weight of two large-diaphragm microphones at a capsule distance of up to 20 centimetres (7 3/4"). Microphones are mounted via two removable 3/8" threads that slide along the bar, with spacers mounted below the bar that can easily be relocated to the top of the bar to configure stacked microphone pairs.

When combined with RODE's Pivot Adaptor accessory the Stereo Bar can be tilted through 210 degrees for optimal versatility.

A series of demonstration videos showing the Stereo Bar in use in X-Y, ORTF and spaced configurations is available at http://rockro.de/stereobar

For more information on the Stereo Bar please visit
Back



The Magazine | Featured Review | Resources & Info | Readers' Tapes | Editors' Blogs | News | Shop | About Us | Contest | Subscriptions | Contact
Terms and Policy | Advertise | Site Map | Copyright 2014 Music Maker Online LLC | Website by Toolstudios
RSS Newsletter Refer a Friend Q&A Q&A